We sowed our first sweet corn on 4/18, eight days earlier than usual this year, because we had auspicious weather. We look at the leaves of the white oaks to decide when it is warm enough for corn planting. The oak leaves should be as big as squirrel’s ears. Phenology signs like this are especially useful when the weather is extremely variable, which we are getting more of as climate disruption has got us in its grip.
Our first sweet corn sowing is always a bit of a risk. In fact we often prepare for this by sowing some corn seeds in styrofoam Speedling flats, the same day we sow the first corn planting outdoors. Read more about this seedling technique and transplanting corn.
We’ve been harvesting sweet corn since July 2, which is two days earlier than our target start date, so we’re very happy. Initially, of course, we got smaller amounts, but we are now harvesting three times a week and getting good amounts. We are back up to 6 sowings this year, after we had to cut back for a couple of years. For a hundred people we sow an average of 1100 ft (335m) each time we plant, with each planting intended to last us 15 days (7 or 8 pickings). Our goal is sweet corn from July 4 to mid-October (our average first frost is October 20, a 13 year average from our own records).
Each sowing includes several varieties (with different numbers of days to maturity) on the same day, so a planting will give us at least two weeks of delicious corn. In this photo from a previous year, you can see (from left to right): later-maturing Silver Queen, not yet at full height; red-flowered Kandy Korn; fast-maturing shorter Bodacious. Each plant is only going to provide two or three ears, so to have enough, and to have a continuous supply, it is necessary to plan ahead. See the Succession Planting section ahead.
Sowing sweet corn
We have switched to sowing corn with the EarthWay seeder, with a homemade next-row marker. This is much quicker than sowing by hand, but does rely on providing overhead irrigation consistently until the seedlings emerge. Another trade-off is that we get more weeds germinating in the (watered) aisles than we did when we only watered the furrows at planting time. Drip irrigation would be another approach. So far we have not lost corn to crows, which was the reason we took to the handsowing-under-ropes method some 20 years ago. Back then we also sowed our fist corn with a tractor seeder, but we had to follow that with putting up ropes, or we lost it all to birds. Details of our hand-sowing method are in this post from May 2016.
Staying on top of weeds in the sweet corn
Once we get to late June, more of our time in the garden is taken up by harvesting (a sign of success), leaving less time for weeding. We have a system I like that helps us stay on top of sweet corn weeds. Each time we sow sweet corn, we hoe the previous planting (about two weeks old), thin the plants to one every 8″-12″ (20-30cm) in the row, and wheel hoe or till between the rows. We have two Valley Oak wheel hoes that we really like. The handle height is adjustable and they are available with different width hoes (and other attachments). Our tiller is a BCS 732 from Earth Tools BCS
We also hoe the rows of the corn planting before that one (about 4 weeks old), and till between those rows and broadcast soybeans (which we till in lightly). Soybeans will grow in partial shade, handle the foot traffic of harvesting, and provide some nitrogen for the soil. For the last corn of the season, we undersow with a mix of soy and oats. After the harvest ends, we leave the patch alone, and the oats survive the first frosts (which kill the corn and the soy) and go on to be our winter cover crop for that plot. When it gets cold enough, the oats do die, and the plot becomes an easy one to bush hog and disk in the early spring for our March-planted potato crop. I like that opportunity to eliminate one round of disking, and to get a winter-killed cover crop established
As we harvest corn we pull out any pigweed that has somehow survived our earlier efforts. I learned at a Sustainable Weed Management workshop, that pigweed puts out its seeds in one big bang at the end, so pulling up huge pigweed is worthwhile, if it hasn’t yet seeded. (Actually you can see it for yourself, but before the workshop I hadn’t noticed!) Our soil has improved over the years, so it is now possible to uproot 5ft (1.5 m) pigweeds. Sometimes we have to hold the corn plant down with our feet, but we do almost always succeed in getting the weeds out, without damaging the corn.
Succession Planting for Sweet Corn
In Sustainable Market Farming I have a chapter on succession planting, and my slideshow on Succession Planting is one of my most popular ones. You can watch it right here.
I posted on Mother Earth News Organic Gardening blog about Growing Sweet Corn for the Whole Summer. You can read it here:
Our sweet corn sowing dates and harvests from those plantings are
- 4/26, harvest 7/9 (with a few ears from 7/4)
- 5/19, harvest 7/24
- 6/6, harvest 8/8
- 6/24, harvest 8/23
- 7/7, harvest 9/7
- 7/16, harvest 9/22
Avoid mixing types of corn.
There’s a confusing aspect of hybrid corn varieties: There are several genotypes, and if you inadvertently plant a mixture of different types, it can lead to starchy unpleasant-flavored corn. Also don’t plant Indian corn, popcorn or any kind of flint or dent corn within 600′ (180 m) of your sweet corn. For this reason we grow only sweet corn in our garden. Ignore those cryptic catalog notes at your peril!
Dealing with raccoons, skunks and curious cats in the corn
We have trapped (and then killed) raccoons in our corn most years, and the past few years we’ve tried deterring them with nightly radio broadcasts. We have the large live mammal traps, and we found for raccoons, we needed to stake the trap down to the ground. I followed suggestions from Joanna Reuter of Chert Hollow Farm, staking the traps down and smearing peanut butter high on the stake in the back of the cage. Well, the first morning I caught a small, very white skunk! I let it out carefully. The next morning I caught the same skunk again. And the third morning, again. You can read more about how I let the skunks out. I’ve also caught some of our cats by accident.
Raccoons don’t seem to like Silver Queen as much as Kandy Korn, maybe because the husks are tighter and harder to rip off. Actually I like Kandy Korn better than Silver Queen too.
We have started harvesting our okra. It’s a little later than it might have been because we had to replant. The first planting had leggy seedlings due to not enough light soon enough in their lives. Then we planted it out with novice helpers, and they didn’t plant them deep enough. The feeble stems couldn’t take it. We made an attempt to hill them up to give more protection to the stems. Another mistake we made was over-watering. When we pulled up some of the dead plants for our postmortem, they reminded me of retted flax stems – the fibers were still there, with the soft tissue rotted away. This is why I think the problem is that we over watered rather than under-watered.
We like Cow Horn for its tall plants, high productivity and the fact that the pods can get relatively large without getting fibrous. They are still tender at 5-6″, which is the size we used to harvest at. Some years we have attached a card to the handles of the pruners we use for this job, with a life-size drawing of a 5″ pod. This helps new crew get it right.
We do find it very hard to convince our cooks that we have specially chosen this “commune-friendly” variety so they don’t have to deal with fiddly little okra pods when cooking for 100. We’ve had to compromise and harvest at 4″. Hence the venturing-out to another variety, accepting people are hard to convince about Cow Horn!
We grow a 90′ row, with plants about 18″ apart in the row. This is enough for the hundred of us (some people never eat okra despite the cooks’ best efforts!)
Carmine Splendor is a 51 day (from transplanting) F1 hybrid, with sturdy 5-sided pods that are deep red when small. I haven’t tasted them yet.
Our June-planted potatoes are starting to come up through the hay mulch, and we need to walk through and free the trapped shoots. This means we walk through investigating the spots where we expect there to be a potato plant but we don’t see one. If we find a trapped shoot, we open up the mulch to let the plant see the light. We do this same job with garlic in late November or early December.
This week we are harvesting our March planted potatoes. I just dug 30lbs for tonight’s dinner. Yes, lots of diners! The rest of the crop will be harvested using a digging machine on Thursday.
We harvested our March-planted potatoes 21 days ago, and we are in the process of sorting them and managing conditions in our root cellar to cure the potatoes and help them store well.
Click here for our “Root Cellar Warden” instructions from last year.
Dormancy Requirements of Potatoes
We are researching the dormancy requirements of potatoes in an effort to store ours so they don’t sprout when we don’t want them to!
What I know so far about dormancy is that potatoes need a dormancy period of 4-8 weeks after harvest before they will sprout. So if you plan to dig up an early crop and immediately replant some of the potatoes for a later crop, take this into account. Get around this problem by refrigerating them for 16 days, then chitting them in the light for 2 weeks. The company of apples, bananas or onions will help them sprout by emitting ethylene.
To avoid sprouting, keep the potatoes below 50F (10C) once they are more than a month from harvest, avoid excess moisture, and avoid “physiological aging” of the potatoes, caused by stressing them with fluctuating temperatures, among other things.
Tobacco Hornworm pupa
Just had to add this, which I dug up yesterday. These brutes are about 2″ (5 cm) long. They are heavy and they move slightly. Also, check out the comments on the last post and be sure to see SESE’s Ken Bezilla’s Instagram of a hornworm in black light.