
In November, I wrote about tackling some summer perennials, especially quackgrass (couchgrass), wiregrass (Bermuda grass) and mugwort. In October I covered winter annual weeds, mostly Henbit, Ground Ivy, Purple Dead Nettle and Chickweed. In September I wrote about late summer weeds, chiefly purslane, velvetleaf, flower of an hour, horsenettle, fall panicum and johnsongrass. In August, I wrote about nutsedges; in July, pigweeds (amaranths), warm weather annuals that put out seeds in a “Big Bang” as Chuck Mohler describes in Manage Weeds on Your Farm. In June, I wrote about docks; in May, galinsoga.
December is a good opportunity for tackling invasive noxious weeds. Go beyond your gardens, walk over your land and, while leaves still remain, monitor for noxious weeds, especially designated Federal Noxious Weeds. Search online for noxious weeds/state name or go into your Extension Service office while in town.
In Virginia we have a good publication Identification of Virginia’s Noxious Weeds. Looking through that document, I am selecting weeds I know we have trouble with in Louisa County: Japanese Stiltgrass, Mile-A-Minute Vine, Oriental Bittersweet and Tree of Heaven. One not included in that document is Trumpet Vine, aka trumpet Creeper, one I have seen pop up in garden plots.
After descriptions of these weeds, I’ll cover some seasonal weed management topics: crop rotations, and soil steaming

Japanese Stiltgrass aka Nepalese browntop
In colder areas, Japanese Stiltgrass dies in the winter. Experiments show that using dry ice in late August in New York State, kills Japanese stiltgrass and may prevent reinvasion for a few years. Not so, where I am!
It grows on the edges of damp woodlands, stream banks, ditches, fields starting to return to woodland, powerline corridors, and, yes, gardens. It is a grass with short lance-shaped leaves arranged alternately on a branched stem heading in a thin spike of flowers or seeds in season. It looks quite delicate and attractive, but each plant can produce 100-1000 seeds, which can persist in the soil for 3-6 years. It can take over! Areas that get infested with Japanese Stiltgrass have decreasing biodiversity, except for other invasive plants and invasive animals. Native wildlife does not choose to graze on this weed.
If you have the beginnings of an invasion, act this year. Mowing to prevent seeding can buy time where the plant is fairly newly established. Roots are shallow, but avoid incorporating seeds by tilling. Action is best taken before seed set, otherwise the plants will need to be hand-pulled and removed.
Covering stiltgrass with 4”-6” of mulch (chips, leaf litter) will prevent stiltgrass from emerging. As the mulch starts to decompose, broadcast seed of a native grass or other suitable plant, into the mulch. Tarping may work, as roots are shallow.
A good resource is the New York Invasive Species Information publication Japanese Stiltgrass


Mile-A-Minute Vine
Persicaria perfoliata (L.) H. Gross (formerly known as Polygonum perfoliatum L.) aka Asiatic Tearthumb. This fast-growingvining weed grows dense mats that smother native species. Here’s a video from the USDA National Invasive Species Information Center.
https://www.youtube.com/watch?v=oMdpzux9SQ8

Oriental Bittersweet, Celastrus orbiculata,
is a climbing woody vine with attractive red berries in orange coats. It can suffocate trees. It spreads by seeds and by roots. Leaves of Oriental Bittersweet are often smaller than native bittersweet. The berries of oriental bittersweet grow up and down the stem with the leaves. See the photo. American bittersweet often has larger, elliptical leaves and the fruit develops at the end of the stem.

Photo: Nature Conservancy
Tree of Heaven, Ailanthus altissima, aka stinking sumac, is devilishly invasive, and is harboring the Spotted Lantern Fly. The ailanthus produces copious quantities of seeds, and inhibits and crowds out native plants nearby. Its roots exude a chemical that is toxic to other plants.

Photo Virginia Tech Extension
The invasive Spotted Lantern Fly Lycorma delicatula,,seeks out the tree of heaven as a place to lay eggs. This insect feeds on and damages many species of native and fruit-bearing trees, especially those with sweet sap, such as grapes and maples. Click the link for lots more resources about the Spotted Lantern Fly, including a map of Virginia showing which areas have infestations. Your own state Extension Service, or Fish and Wildlife Service will provide similar info. Note that quarantined areas have restrictions on the movement of plants, wood chips, firewood, outdoor furniture and much else.
https://www.youtube.com/watch?v=N-xUNpA3DF4
The tree of heaven springs up quickly after disturbances (such as extreme weather or infestations of spongy moths). The climate catastrophe is leading to more extreme weather like stronger storms and longer droughts, which allow the spongy moth to thrive.
There are multiple ways to control the tree of heaven. The most effective way is to pull up or dig seedlings before the taproot develops. If the plant has matured, cutting it down will help temporarily by reducing its ability to spread by seeding. The roots must be removed to stop the tree regrowing.
Be sure to correctly identify the tree of heaven, as it looks similar to some native species such as sumac, ash and black walnut, which also have pinnately compound leaves arranged in pairs across the stem. Ailanthus can be distinguished from these native species by its fuzzy, reddish-brown twigs and clusters of light green seed pods.

Photo by Sally and Andy Wasowski.
Trumpet Vine, Campsis radicans,
is an aggressive woody vine that climbs or sprawls, depending on the vegetation available. It can climb high in trees using aerial rootlets,and also infest pastures. The flowers are attractive to people and to hummingbirds! Its rapid colonization by suckers and layering makes it useful for erosion control, but its problems may be worse than its good features. Although deliberately cultivated in some colder areas, in the Southeast its aggressive habit has earned it the names of Hellvine and Devil’s Shoestring.
Crop Rotations to reduce weed problems
By planning a crop rotation that mixes up the seasons of crop growth each year, you can reduce the chances of weed seeds germinating. Try to have early season food crops one year followed by late season food crops the next year. With cover crops in between. This is known as “phenologically diverse crop rotations.”

Our own crop rotations, planned to maximise opportunities for cover crops, especially legumes, tend to have several years of early spring food crops (cabbage, broccoli, spinach, kale, March-planted potatoes) which finish by July, allowing us to plant cover crops mixes based on oats in August, which may winter-kill and allow more early food crops the next year. Likewise the food crops planted in warm weather yield until frosts, by which time it is too late to sow oats, and we go with winter wheat and crimson clover or Austrian winter peas, which we turn under in late April. This sequence naturally works easiest when more late-planted food crops follow. If you have a bad weed problem, you might decide to forego best cover crops for a few years. Our year-round clover mix really helps us. The annual weeds get mowed while the clover grows.
Tarping or solarizing can be effective ways to deal with weeds. See my 2021 post Dealing with Weeds.
ATTRA Soil Steaming for Pathogen, Pest, and Weed Control in High Tunnels

Photo Chris Lent, ATTRA
Soil steaming is a relatively new practice, and the equipment is expensive. The ATTRA publication discusses trying this in high tunnels (hoophouses) where the space is of higher value than outdoors, and grants were available.
The goal is to pasteurize the soil, not kill everything. Holding the temperature at a minimum of 140°F for 30 minutes provides fungal and bacterial pathogen control. Chickweed and soilborne pythium (damping off) control also occurred at 140°F. If the temperature gets too hot, the steam can kill beneficial nitrifying bacteria.
This is an emerging technology I mention for the pioneers reading this and for the rest of us to keep an ear open for developments. Perhaps this kind of equipment could be shared by several farms, or rented out.
Excerpt from Manage Weeds on Your Farm:
“Like flame weeders, steam and hot water weeders kill by disrupting plant surfaces, leading to subsequent desiccation. Their advantage over flame weeders is that the flame is enclosed in a boiler, which minimizes risk of starting a fire. Their energy use, however, is several fold higher per acre than typical flame weeders. Hot water weeders are more energy efficient than steam weeders because they do not bring water to a boil, but steam weeders require a smaller volume of water. Although hot water and steam weeders are finding some acceptance for urban weed management, adoption rates in agriculture have been low due to their high fuel usage and the potential soil compaction from hauling large volumes of water over tilled fields.”
Related ATTRA Resources:
ATTRA Video: Soil Steaming for High Tunnels
Other Resources:
The Ag Engineering Podcast: Soil Steaming for Weed Control: EP61
